adeck/platform-raspberrypi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Compare commits

base: adeck:develop
Branches Tags
adeck:develop
adeck:bmp
adeck:ota
adeck:zephyr
adeck:patchup
adeck:patch-1
adeck:master
adeck:v1.1.0
adeck:v1.0.0
..
compare: adeck:master
Branches Tags
adeck:develop
adeck:bmp
adeck:ota
adeck:zephyr
adeck:patchup
adeck:patch-1
adeck:master
adeck:v1.1.0
adeck:v1.0.0

No commits in common. "develop" and "master" have entirely different histories.
develop ... master

101 changed files with 500 additions and 10739 deletions
Show Stats Expand all files Collapse all files

39
.github/workflows/examples.yml vendored
View File

@ -7,46 +7,25 @@ jobs:
strategy:
fail-fast: false
matrix:
os: [ubuntu-latest, windows-latest, macos-latest]
os: [ubuntu-16.04, windows-latest, macos-latest]
python-version: [3.7]
example:
- "examples/arduino-blink"
- "examples/arduino-wifi-scan"
- "examples/arduino-ota"
- "examples/arduino-signed-ota"
- "examples/arduino-external-libs"
runs-on: ${{ matrix.os }}
steps:
- uses: actions/checkout@v3
- uses: actions/checkout@v2
with:
submodules: "recursive"
- name: Set up Python
uses: actions/setup-python@v3
- name: Set up Python ${{ matrix.python-version }}
uses: actions/setup-python@v1
with:
python-version: "3.9"
- name: Enable Long Paths
run: |
if [ "$RUNNER_OS" == "Windows" ]; then
git config --system core.longpaths true
fi
shell: bash
python-version: ${{ matrix.python-version }}
- name: Install dependencies
run: |
python -m pip install --upgrade pip
pip install -U https://github.com/platformio/platformio/archive/develop.zip
pio pkg install --global --platform symlink://.
# OpenSSL needed for signed OTA update example
- name: Install OpenSSL
run: |
if [ "$RUNNER_OS" == "Linux" ]; then
sudo apt-get install -y openssl
elif [ "$RUNNER_OS" == "Windows" ]; then
choco install openssl
elif [ "$RUNNER_OS" == "macOS" ]; then
brew install openssl
else
echo "$RUNNER_OS not supported"
exit 1
fi
shell: bash
platformio platform install file://.
- name: Build examples
run: |
pio run -d ${{ matrix.example }}
platformio run -d ${{ matrix.example }}

10
README.md
View File

@ -4,13 +4,13 @@
RP2040 is a low-cost, high-performance microcontroller device with a large on-chip memory, symmetric dual-core processor complex, deterministic bus fabric, and rich peripheral set augmented with a unique Programmable I/O (PIO) subsystem, it provides professional users with unrivalled power and flexibility.
* [Home](https://registry.platformio.org/platforms/platformio/raspberrypi) (home page in the PlatformIO Registry)
* [Documentation](https://docs.platformio.org/page/platforms/raspberrypi.html) (advanced usage, packages, boards, frameworks, etc.)
* [Home](http://platformio.org/platforms/raspberrypi) (home page in PlatformIO Platform Registry)
* [Documentation](http://docs.platformio.org/page/platforms/raspberrypi.html) (advanced usage, packages, boards, frameworks, etc.)
# Usage
1. [Install PlatformIO](https://platformio.org)
2. Create PlatformIO project and configure a platform option in [platformio.ini](https://docs.platformio.org/page/projectconf.html) file:
1. [Install PlatformIO](http://platformio.org)
2. Create PlatformIO project and configure a platform option in [platformio.ini](http://docs.platformio.org/page/projectconf.html) file:
## Stable version
@ -32,4 +32,4 @@ board = ...
# Configuration
Please navigate to [documentation](https://docs.platformio.org/page/platforms/raspberrypi.html).
Please navigate to [documentation](http://docs.platformio.org/page/platforms/raspberrypi.html).

56
boards/0xcb_helios.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q128jvxq_4_padded_checksum.S",
"usb_vid": "0x1209",
"usb_pid": "0xCB74"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_0XCB_HELIOS -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x1209",
"0xCB74"
]
],
"mcu": "rp2040",
"variant": "0xcb_helios"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Helios",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 16777216,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "0xCB"
}

56
boards/adafruit_feather.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25x10cl_4_padded_checksum.S",
"usb_vid": "0x239A",
"usb_pid": "0x80F1"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_ADAFRUIT_FEATHER_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x239A",
"0x80F1"
]
],
"mcu": "rp2040",
"variant": "adafruit_feather"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Feather RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Adafruit"
}

56
boards/adafruit_feather_can.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x239A",
"usb_pid": "0x812F"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_ADAFRUIT_FEATHER_RP2040_CAN -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x239A",
"0x812F"
]
],
"mcu": "rp2040",
"variant": "adafruit_feather_can"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Feather RP2040 CAN",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Adafruit"
}

56
boards/adafruit_feather_dvi.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x239A",
"usb_pid": "0x8127"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_ADAFRUIT_FEATHER_RP2040_DVI -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x239A",
"0x8127"
]
],
"mcu": "rp2040",
"variant": "adafruit_feather_dvi"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Feather RP2040 DVI",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Adafruit"
}

56
boards/adafruit_feather_prop_maker.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x239A",
"usb_pid": "0x8131"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_ADAFRUIT_FEATHER_RP2040_PROP_MAKER -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x239A",
"0x8131"
]
],
"mcu": "rp2040",
"variant": "adafruit_feather_prop_maker"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Feather RP2040 Prop-Maker",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Adafruit"
}

56
boards/adafruit_feather_rfm.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x239A",
"usb_pid": "0x812D"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_ADAFRUIT_FEATHER_RP2040_RFM -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x239A",
"0x812D"
]
],
"mcu": "rp2040",
"variant": "adafruit_feather_rfm"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Feather RP2040 RFM",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Adafruit"
}

56
boards/adafruit_feather_scorpio.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x239A",
"usb_pid": "0x8121"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_ADAFRUIT_FEATHER_RP2040_SCORPIO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x239A",
"0x8121"
]
],
"mcu": "rp2040",
"variant": "adafruit_feather_scorpio"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Feather RP2040 SCORPIO",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Adafruit"
}

56
boards/adafruit_feather_thinkink.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x239A",
"usb_pid": "0x812B"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_ADAFRUIT_FEATHER_RP2040_THINKINK -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x239A",
"0x812B"
]
],
"mcu": "rp2040",
"variant": "adafruit_feather_thinkink"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Feather RP2040 ThinkINK",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Adafruit"
}

56
boards/adafruit_feather_usb_host.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x239A",
"usb_pid": "0x8129"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_ADAFRUIT_FEATHER_RP2040_USB_HOST -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x239A",
"0x8129"
]
],
"mcu": "rp2040",
"variant": "adafruit_feather_usb_host"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Feather RP2040 USB Host",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Adafruit"
}

56
boards/adafruit_itsybitsy.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x239A",
"usb_pid": "0x80FD"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_ADAFRUIT_ITSYBITSY_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x239A",
"0x80FD"
]
],
"mcu": "rp2040",
"variant": "adafruit_itsybitsy"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "ItsyBitsy RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Adafruit"
}

56
boards/adafruit_kb2040.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x239A",
"usb_pid": "0x8105"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_ADAFRUIT_KB2040_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x239A",
"0x8105"
]
],
"mcu": "rp2040",
"variant": "adafruit_kb2040"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "KB2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Adafruit"
}

56
boards/adafruit_macropad2040.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x239A",
"usb_pid": "0x8107"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_ADAFRUIT_MACROPAD_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x239A",
"0x8107"
]
],
"mcu": "rp2040",
"variant": "adafruit_macropad2040"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "MacroPad RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Adafruit"
}

56
boards/adafruit_qtpy.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x239A",
"usb_pid": "0x80F7"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_ADAFRUIT_QTPY_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x239A",
"0x80F7"
]
],
"mcu": "rp2040",
"variant": "adafruit_qtpy"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "QT Py RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Adafruit"
}

56
boards/adafruit_stemmafriend.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x239A",
"usb_pid": "0x80E3"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_ADAFRUIT_STEMMAFRIEND_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x239A",
"0x80E3"
]
],
"mcu": "rp2040",
"variant": "adafruit_stemmafriend"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "STEMMA Friend RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Adafruit"
}

56
boards/adafruit_trinkeyrp2040qt.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x239A",
"usb_pid": "0x8109"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_ADAFRUIT_TRINKEYQT_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x239A",
"0x8109"
]
],
"mcu": "rp2040",
"variant": "adafruit_trinkeyrp2040qt"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Trinkey RP2040 QT",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Adafruit"
}

56
boards/arduino_nano_connect.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2341",
"usb_pid": "0x005E"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_NANO_RP2040_CONNECT -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2341",
"0x005E"
]
],
"mcu": "rp2040",
"variant": "arduino_nano_connect"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Nano RP2040 Connect",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 16777216,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Arduino"
}

56
boards/artronshop_rp2_nano.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x000A"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_ARTRONSHOP_RP2_NANO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x000A"
]
],
"mcu": "rp2040",
"variant": "artronshop_rp2_nano"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "RP2 Nano",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "ArtronShop"
}

56
boards/bridgetek_idm2040-7a.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1041"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_BRIDGETEK_IDM2040-7A -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250 -DFT8XX_TYPE=BT817 -DDISPLAY_RES=WVGA -DPLATFORM_RP2040",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1041"
]
],
"mcu": "rp2040",
"variant": "bridgetek_idm2040-7a"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "IDM2040-7A",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "BridgeTek"
}

56
boards/challenger_2040_lora.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1023"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_CHALLENGER_2040_LORA_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1023"
]
],
"mcu": "rp2040",
"variant": "challenger_2040_lora"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Challenger 2040 LoRa",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "iLabs"
}

56
boards/challenger_2040_lte.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x100B"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_CHALLENGER_2040_LTE_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x100B"
]
],
"mcu": "rp2040",
"variant": "challenger_2040_lte"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Challenger 2040 LTE",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "iLabs"
}

56
boards/challenger_2040_nfc.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1036"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_CHALLENGER_2040_NFC_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1036"
]
],
"mcu": "rp2040",
"variant": "challenger_2040_nfc"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Challenger 2040 NFC",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "iLabs"
}

56
boards/challenger_2040_sdrtc.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x102D"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_CHALLENGER_2040_SDRTC_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x102D"
]
],
"mcu": "rp2040",
"variant": "challenger_2040_sdrtc"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Challenger 2040 SD/RTC",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "iLabs"
}

56
boards/challenger_2040_subghz.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1032"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_CHALLENGER_2040_SUBGHZ_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1032"
]
],
"mcu": "rp2040",
"variant": "challenger_2040_subghz"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Challenger 2040 SubGHz",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "iLabs"
}

56
boards/challenger_2040_uwb.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1052"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_CHALLENGER_2040_UWB_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1052"
]
],
"mcu": "rp2040",
"variant": "challenger_2040_uwb"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Challenger 2040 UWB",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "iLabs"
}

56
boards/challenger_2040_wifi.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1006"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_CHALLENGER_2040_WIFI_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250 -DWIFIESPAT2",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1006"
]
],
"mcu": "rp2040",
"variant": "challenger_2040_wifi"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Challenger 2040 WiFi",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "iLabs"
}

56
boards/challenger_2040_wifi6_ble.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x105F"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_CHALLENGER_2040_WIFI6_BLE_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500 -DWIFIESPAT2",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x105F"
]
],
"mcu": "rp2040",
"variant": "challenger_2040_wifi6_ble"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Challenger 2040 WiFi6/BLE",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "iLabs"
}

56
boards/challenger_2040_wifi_ble.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x102C"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_CHALLENGER_2040_WIFI_BLE_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500 -DWIFIESPAT2",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x102C"
]
],
"mcu": "rp2040",
"variant": "challenger_2040_wifi_ble"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Challenger 2040 WiFi/BLE",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "iLabs"
}

56
boards/challenger_nb_2040_wifi.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x100D"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_CHALLENGER_NB_2040_WIFI_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500 -DWIFIESPAT2",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x100D"
]
],
"mcu": "rp2040",
"variant": "challenger_nb_2040_wifi"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Challenger NB 2040 WiFi",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "iLabs"
}

56
boards/cytron_maker_nano_rp2040.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x100F"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_CYTRON_MAKER_NANO_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x100F"
]
],
"mcu": "rp2040",
"variant": "cytron_maker_nano_rp2040"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Maker Nano RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Cytron"
}

56
boards/cytron_maker_pi_rp2040.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1000"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_CYTRON_MAKER_PI_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1000"
]
],
"mcu": "rp2040",
"variant": "cytron_maker_pi_rp2040"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Maker Pi RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Cytron"
}

56
boards/datanoisetv_picoadk.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x000A"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_DATANOISETV_PICOADK -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x000A"
]
],
"mcu": "rp2040",
"variant": "datanoisetv_picoadk"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "PicoADK",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "DatanoiseTV"
}

56
boards/dfrobot_beetle_rp2040.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x3343",
"usb_pid": "0x4253"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_DFROBOT_BEETLE_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x3343",
"0x4253"
]
],
"mcu": "rp2040",
"variant": "dfrobot_beetle_rp2040"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Beetle RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "DFRobot"
}

56
boards/electroniccats_huntercat_nfc.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1037"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_ELECTRONICCATS_HUNTERCAT_NFC -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1037"
]
],
"mcu": "rp2040",
"variant": "electroniccats_huntercat_nfc"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "HunterCat NFC RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "ElectronicCats"
}

56
boards/extelec_rc2040.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0xEE20"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_EXTREMEELEXTRONICS_RC2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0xEE20"
]
],
"mcu": "rp2040",
"variant": "extelec_rc2040"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "RC2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "ExtremeElectronics"
}

56
boards/flyboard2040_core.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x008A"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_FLYBOARD2040_CORE -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x008A"
]
],
"mcu": "rp2040",
"variant": "flyboard2040_core"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "FlyBoard2040Core",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 4194304,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "DeRuiLab"
}

56
boards/generic.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_generic_03h_4_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0xF00A"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_GENERIC_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0xF00A"
]
],
"mcu": "rp2040",
"variant": "generic"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 16777216,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Generic"
}

56
boards/ilabs_rpico32.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1010"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_ILABS_2040_RPICO32_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1010"
]
],
"mcu": "rp2040",
"variant": "ilabs_rpico32"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "RPICO32",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "iLabs"
}

56
boards/melopero_cookie_rp2040.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1011"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_MELOPERO_COOKIE_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1011"
]
],
"mcu": "rp2040",
"variant": "melopero_cookie_rp2040"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Cookie RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Melopero"
}

56
boards/melopero_shake_rp2040.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1005"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_MELOPERO_SHAKE_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1005"
]
],
"mcu": "rp2040",
"variant": "melopero_shake_rp2040"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Shake RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 16777216,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Melopero"
}

15
boards/nanorp2040connect.json
View File

@ -1,18 +1,8 @@
{
"build": {
"arduino": {
"earlephilhower": {
"variant": "arduino_nano_connect",
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_pid": "0x0058",
"usb_vid": "0x2341",
"usb_manufacturer": "Arduino",
"usb_product" : "Arduino Nano RP2040 Connect"
}
},
"core": "arduino",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_NANO_RP2040_CONNECT -DARDUINO_ARCH_RP2040",
"extra_flags": "-D NANO_RP2040_CONNECT -DARDUINO_ARCH_RP2040",
"f_cpu": "133000000L",
"hwids": [
[
@ -48,8 +38,7 @@
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe"
"picotool"
]
},
"url": "https://blog.arduino.cc/2021/01/20/welcome-raspberry-pi-to-the-world-of-microcontrollers/",

56
boards/nekosystems_bl2040_mini.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_generic_03h_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x000A"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_NEKOSYSTEMS_BL2040_MINI -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x000A"
]
],
"mcu": "rp2040",
"variant": "nekosystems_bl2040_mini"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "BL2040 Mini",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 4194304,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Neko Systems"
}

56
boards/nullbits_bit_c_pro.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25x10cl_4_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x6E61"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_NULLBITS_BIT_C_PRO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x6E61"
]
],
"mcu": "rp2040",
"variant": "nullbits_bit_c_pro"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Bit-C PRO",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 4194304,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "nullbits"
}

16
boards/pico.json
View File

@ -1,18 +1,8 @@
{
"build": {
"arduino": {
"earlephilhower": {
"variant": "rpipico",
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2e8a",
"usb_pid": "0x000a",
"usb_manufacturer": "Raspberry Pi",
"usb_product": "Pico"
}
},
"core": "arduino",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_RASPBERRY_PI_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
"extra_flags": "-D RASPBERRY_PI_PICO -DARDUINO_ARCH_RP2040",
"f_cpu": "133000000L",
"hwids": [
[
@ -41,12 +31,10 @@
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe"
"picotool"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",

56
boards/pimoroni_pga2040.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q64jv_4_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1008"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_PIMORONI_PGA2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1008"
]
],
"mcu": "rp2040",
"variant": "pimoroni_pga2040"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "PGA2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Pimoroni"
}

56
boards/pimoroni_plasma2040.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x100A"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_PIMORONI_PLASMA2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x100A"
]
],
"mcu": "rp2040",
"variant": "pimoroni_plasma2040"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Plasma2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Pimoroni"
}

56
boards/rpipico.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x000A"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_RASPBERRY_PI_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x000A"
]
],
"mcu": "rp2040",
"variant": "rpipico"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Pico",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Raspberry Pi"
}

56
boards/rpipicow.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0xF00A"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_RASPBERRY_PI_PICO_W -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0xF00A"
]
],
"mcu": "rp2040",
"variant": "rpipicow"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Pico W",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Raspberry Pi"
}

56
boards/seeed_indicator_rp2040.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2886",
"usb_pid": "0x0050"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_SEEED_INDICATOR_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2886",
"0x0050"
]
],
"mcu": "rp2040",
"variant": "seeed_indicator_rp2040"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "INDICATOR RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Seeed"
}

56
boards/seeed_xiao_rp2040.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x000A"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_SEEED_XIAO_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x000A"
]
],
"mcu": "rp2040",
"variant": "seeed_xiao_rp2040"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "XIAO RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Seeed"
}

56
boards/solderparty_rp2040_stamp.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_generic_03h_4_padded_checksum.S",
"usb_vid": "0x1209",
"usb_pid": "0xA182"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_SOLDERPARTY_RP2040_STAMP -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x1209",
"0xA182"
]
],
"mcu": "rp2040",
"variant": "solderparty_rp2040_stamp"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "RP2040 Stamp",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Solder Party"
}

56
boards/sparkfun_promicrorp2040.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_generic_03h_4_padded_checksum.S",
"usb_vid": "0x1B4F",
"usb_pid": "0x0026"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_SPARKFUN_PROMICRO_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x1B4F",
"0x0026"
]
],
"mcu": "rp2040",
"variant": "sparkfun_promicrorp2040"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "ProMicro RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 16777216,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "SparkFun"
}

56
boards/sparkfun_thingplusrp2040.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x1B4F",
"usb_pid": "0x0026"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_SPARKFUN_THINGPLUS_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x1B4F",
"0x0026"
]
],
"mcu": "rp2040",
"variant": "sparkfun_thingplusrp2040"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Thing Plus RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 16777216,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "SparkFun"
}

56
boards/upesy_rp2040_devkit.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1007"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_UPESY_RP2040_DEVKIT -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1007"
]
],
"mcu": "rp2040",
"variant": "upesy_rp2040_devkit"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "RP2040 DevKit",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "uPesy"
}

56
boards/vccgnd_yd_rp2040.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_generic_03h_4_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x800A"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_YD_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x800A"
]
],
"mcu": "rp2040",
"variant": "vccgnd_yd_rp2040"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "YD RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 16777216,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "VCC-GND"
}

56
boards/viyalab_mizu.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_generic_03h_4_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x000A"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_VIYALAB_MIZU_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x000A"
]
],
"mcu": "rp2040",
"variant": "viyalab_mizu"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "Mizu RP2040",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 8388608,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Viyalab"
}

56
boards/waveshare_rp2040_lcd_0_96.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q16jvxq_4_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1021"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_WAVESHARE_RP2040_LCD_0_96 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1021"
]
],
"mcu": "rp2040",
"variant": "waveshare_rp2040_lcd_0_96"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "RP2040 LCD 0.96",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Waveshare"
}

56
boards/waveshare_rp2040_lcd_1_28.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q16jvxq_4_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1039"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_WAVESHARE_RP2040_LCD_1_28 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1039"
]
],
"mcu": "rp2040",
"variant": "waveshare_rp2040_lcd_1_28"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "RP2040 LCD 1.28",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Waveshare"
}

56
boards/waveshare_rp2040_one.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q16jvxq_4_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x103A"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_WAVESHARE_RP2040_ONE -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x103A"
]
],
"mcu": "rp2040",
"variant": "waveshare_rp2040_one"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "RP2040 One",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 4194304,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Waveshare"
}

56
boards/waveshare_rp2040_plus_16mb.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1020"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_WAVESHARE_RP2040_PLUS -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1020"
]
],
"mcu": "rp2040",
"variant": "waveshare_rp2040_plus_16mb"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "RP2040 Plus 16MB",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 16777216,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Waveshare"
}

56
boards/waveshare_rp2040_plus_4mb.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1020"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_WAVESHARE_RP2040_PLUS -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1020"
]
],
"mcu": "rp2040",
"variant": "waveshare_rp2040_plus_4mb"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "RP2040 Plus 4MB",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 4194304,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Waveshare"
}

56
boards/waveshare_rp2040_zero.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q16jvxq_4_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x0003"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_WAVESHARE_RP2040_ZERO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x0003"
]
],
"mcu": "rp2040",
"variant": "waveshare_rp2040_zero"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "RP2040 Zero",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "Waveshare"
}

56
boards/wiznet_5100s_evb_pico.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1027"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_WIZNET_5100S_EVB_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1027"
]
],
"mcu": "rp2040",
"variant": "wiznet_5100s_evb_pico"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "W5100S-EVB-Pico",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "WIZnet"
}

56
boards/wiznet_5500_evb_pico.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1029"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_WIZNET_5500_EVB_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1029"
]
],
"mcu": "rp2040",
"variant": "wiznet_5500_evb_pico"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "W5500-EVB-Pico",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "WIZnet"
}

56
boards/wiznet_wizfi360_evb_pico.json
View File

@ -1,56 +0,0 @@
{
"build": {
"arduino": {
"earlephilhower": {
"boot2_source": "boot2_w25q080_2_padded_checksum.S",
"usb_vid": "0x2E8A",
"usb_pid": "0x1028"
}
},
"core": "earlephilhower",
"cpu": "cortex-m0plus",
"extra_flags": "-D ARDUINO_WIZNET_WIZFI360_EVB_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
"f_cpu": "133000000L",
"hwids": [
[
"0x2E8A",
"0x00C0"
],
[
"0x2E8A",
"0x1028"
]
],
"mcu": "rp2040",
"variant": "wiznet_wizfi360_evb_pico"
},
"debug": {
"jlink_device": "RP2040_M0_0",
"openocd_target": "rp2040.cfg",
"svd_path": "rp2040.svd"
},
"frameworks": [
"arduino"
],
"name": "WizFi360-EVB-Pico",
"upload": {
"maximum_ram_size": 270336,
"maximum_size": 2097152,
"require_upload_port": true,
"native_usb": true,
"use_1200bps_touch": true,
"wait_for_upload_port": false,
"protocol": "picotool",
"protocols": [
"blackmagic",
"cmsis-dap",
"jlink",
"raspberrypi-swd",
"picotool",
"picoprobe",
"pico-debug"
]
},
"url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
"vendor": "WIZnet"
}

13
builder/frameworks/_bare.py
View File

@ -21,12 +21,7 @@ from SCons.Script import DefaultEnvironment
env = DefaultEnvironment()
env.Append(
ASFLAGS=[
"-mthumb",
],
ASPPFLAGS=[
"-x", "assembler-with-cpp",
],
ASFLAGS=["-x", "assembler-with-cpp"],
CCFLAGS=[
"-Os", # optimize for size
@ -59,9 +54,6 @@ env.Append(
if "BOARD" in env:
env.Append(
ASFLAGS=[
"-mcpu=%s" % env.BoardConfig().get("build.cpu")
],
CCFLAGS=[
"-mcpu=%s" % env.BoardConfig().get("build.cpu")
],
@ -69,3 +61,6 @@ if "BOARD" in env:
"-mcpu=%s" % env.BoardConfig().get("build.cpu")
]
)
# copy CCFLAGS to ASFLAGS (-x assembler-with-cpp mode)
env.Append(ASFLAGS=env.get("CCFLAGS", [])[:])

39
builder/frameworks/arduino/arduino.py
View File

@ -1,39 +0,0 @@
# Copyright 2021-present Maximilian Gerhardt <maximilian.gerhardt@rub.de>
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
import sys
from os.path import join, isfile
from SCons.Script import DefaultEnvironment, SConscript
env = DefaultEnvironment()
core = env.BoardConfig().get("build.core", "arduino")
build_script = ""
# select build script as either from the Earle Philhower core or
# from the builder script contained in this platform.
if core == "earlephilhower":
build_script = join(
env.PioPlatform().get_package_dir("framework-arduinopico"), "tools", "platformio-build.py")
else:
build_script = join(env.PioPlatform().get_dir(), "builder",
"frameworks", "arduino", "mbed-core", "arduino-core-mbed.py")
if not isfile(build_script):
sys.stderr.write(
"Error: Missing PlatformIO build script %s!\n" % build_script)
env.Exit(1)
SConscript(build_script)

2
builder/frameworks/arduino/mbed-core

@ -1 +1 @@
Subproject commit 6174f769bfc8610a397ed0c912cd059246e547cd
Subproject commit ceb4f608f9b4834ac4fa5472e1db2a2c2f9d216e

352
builder/main.py
View File

@ -14,91 +14,14 @@
import sys
from platform import system
from os import makedirs, remove
from os.path import isdir, join, isfile
import re
import time
from shutil import copyfile
from os import makedirs
from os.path import isdir, join
from platformio.public import list_serial_ports
from platformio.util import get_serial_ports
from SCons.Script import (ARGUMENTS, COMMAND_LINE_TARGETS, AlwaysBuild,
Builder, Default, DefaultEnvironment)
def convert_size_expression_to_int(expression):
conversion_factors = {
"M": 1024*1024,
"MB": 1024*1024,
"K": 1024,
"KB": 1024,
"B": 1,
"": 1 # giving no conversion factor is factor 1.
}
# match <floating pointer number><conversion factor>.
extract_regex = r'^((?:[0-9]*[.])?[0-9]+)([mkbMKB]*)$'
res = re.findall(extract_regex, expression)
# unparsable expression? Warning.
if len(res) == 0:
sys.stderr.write(
"Error: Could not parse filesystem size expression '%s'."
" Will treat as size = 0.\n" % str(expression))
return 0
# access first result
number, factor = res[0]
number = float(number)
number *= conversion_factors[factor.upper()]
return int(number)
def fetch_fs_size(env):
# follow generation formulas from makeboards.py for Earle Philhower core
# given the total flash size, a user can specify
# the amount for the filesystem (0MB, 2MB, 4MB, 8MB, 16MB)
# via board_build.filesystem_size,
# and we will calculate the flash size and eeprom size from that.
flash_size = board.get("upload.maximum_size")
filesystem_size = board.get("build.filesystem_size", "0MB")
filesystem_size_int = convert_size_expression_to_int(filesystem_size)
# last 4K are allocated for EEPROM emulation in flash.
# see https://github.com/earlephilhower/arduino-pico/blob/3414b73172d307e9dc901f7fee83b41112f73457/libraries/EEPROM/EEPROM.cpp#L43-L46
eeprom_size = 4096
maximum_sketch_size = flash_size - eeprom_size - filesystem_size_int
print("Flash size: %.2fMB" % (flash_size / 1024.0 / 1024.0))
print("Sketch size: %.2fMB" % (maximum_sketch_size / 1024.0 / 1024.0))
print("Filesystem size: %.2fMB" % (filesystem_size_int / 1024.0 / 1024.0))
eeprom_start = 0x10000000 + flash_size - eeprom_size
fs_start = 0x10000000 + flash_size - eeprom_size - filesystem_size_int
fs_end = 0x10000000 + flash_size - eeprom_size
if maximum_sketch_size <= 0:
sys.stderr.write(
"Error: Filesystem too large for given flash. "
"Can at max be flash size - 4096 bytes. "
"Available sketch size with current "
"config would be %d bytes.\n" % maximum_sketch_size)
sys.stderr.flush()
env.Exit(1)
env["PICO_FLASH_LENGTH"] = maximum_sketch_size
env["PICO_EEPROM_START"] = eeprom_start
env["FS_START"] = fs_start
env["FS_END"] = fs_end
# LittleFS configuration parameters taken from
# https://github.com/earlephilhower/arduino-pico-littlefs-plugin/blob/master/src/PicoLittleFS.java
env["FS_PAGE"] = 256
env["FS_BLOCK"] = 4096
print("Maximium Sketch size: %d "
"EEPROM start: %s Filesystem start: %s "
"Filesystem end: %s" %
(maximum_sketch_size, hex(eeprom_start), hex(fs_start), hex(fs_end)))
def __fetch_fs_size(target, source, env):
fetch_fs_size(env)
return (target, source)
def BeforeUpload(target, source, env): # pylint: disable=W0613,W0621
upload_options = {}
@ -106,7 +29,7 @@ def BeforeUpload(target, source, env): # pylint: disable=W0613,W0621
upload_options = env.BoardConfig().get("upload", {})
env.AutodetectUploadPort()
before_ports = list_serial_ports()
before_ports = get_serial_ports()
if upload_options.get("use_1200bps_touch", False):
env.TouchSerialPort("$UPLOAD_PORT", 1200)
@ -120,7 +43,7 @@ def generate_uf2(target, source, env):
env.Execute(
" ".join(
[
"elf2uf2",
join(platform.get_package_dir("tool-rp2040tools") or "", "elf2uf2"),
'"%s"' % elf_file,
'"%s"' % elf_file.replace(".elf", ".uf2"),
]
@ -133,8 +56,6 @@ platform = env.PioPlatform()
board = env.BoardConfig()
env.Replace(
__fetch_fs_size=fetch_fs_size,
AR="arm-none-eabi-ar",
AS="arm-none-eabi-as",
CC="arm-none-eabi-gcc",
@ -146,9 +67,6 @@ env.Replace(
ARFLAGS=["rc"],
MKFSTOOL="mklittlefs",
PICO_FS_IMAGE_NAME=env.get("PICO_FS_IMAGE_NAME", "littlefs"),
SIZEPROGREGEXP=r"^(?:\.text|\.data|\.rodata|\.text.align|\.ARM.exidx)\s+(\d+).*",
SIZEDATAREGEXP=r"^(?:\.data|\.bss|\.noinit)\s+(\d+).*",
SIZECHECKCMD="$SIZETOOL -A -d $SOURCES",
@ -184,22 +102,6 @@ env.Append(
"$TARGET"
]), "Building $TARGET"),
suffix=".hex"
),
BinToSignedBin=Builder(
action=env.VerboseAction(" ".join([
'"$PYTHONEXE" "%s"' % join(
platform.get_package_dir("framework-arduinopico") or "",
"tools", "signing.py"),
"--mode",
"sign",
"--privatekey",
'"%s"' % join("$PROJECT_SRC_DIR", "private.key"),
"--bin",
"$SOURCES",
"--out",
"$TARGET"
]), "Building $TARGET"),
suffix=".bin.signed"
)
)
)
@ -207,81 +109,26 @@ env.Append(
if not env.get("PIOFRAMEWORK"):
env.SConscript("frameworks/_bare.py")
env.Append(
BUILDERS=dict(
DataToBin=Builder(
action=env.VerboseAction(" ".join([
'"$MKFSTOOL"',
"-c", "$SOURCES",
"-p", "$FS_PAGE",
"-b", "$FS_BLOCK",
"-s", "${FS_END - FS_START}",
"$TARGET"
]), "Building file system image from '$SOURCES' directory to $TARGET"),
emitter=__fetch_fs_size,
source_factory=env.Dir,
suffix=".bin"
)
)
)
is_arduino_pico_build = env.BoardConfig().get("build.core", "arduino") == "earlephilhower" and "arduino" in env.get("PIOFRAMEWORK")
if is_arduino_pico_build:
pubkey = join(env.subst("$PROJECT_SRC_DIR"), "public.key")
if isfile(pubkey):
header_file = join(env.subst("$BUILD_DIR"), "core", "Updater_Signing.h")
env.Prepend(CCFLAGS=['-I"%s"' % join("$BUILD_DIR", "core")])
env.Execute(" ".join([
'"$PYTHONEXE" "%s"' % join(
platform.get_package_dir("framework-arduinopico"), "tools", "signing.py"),
"--mode", "header",
"--publickey", '"%s"' % join("$PROJECT_SRC_DIR", "public.key"),
"--out", '"%s"' % join("$BUILD_DIR", "core", "Updater_Signing.h")
]))
#
# Target: Build executable and linkable firmware
#
target_elf = None
target_signed_bin = None
if "nobuild" in COMMAND_LINE_TARGETS:
target_elf = join("$BUILD_DIR", "${PROGNAME}.elf")
target_firm = join("$BUILD_DIR", "${PROGNAME}.bin")
target_firm = join("$BUILD_DIR", "${PROGNAME}.bin.signed")
else:
target_elf = env.BuildProgram()
if set(["buildfs", "uploadfs"]) & set(COMMAND_LINE_TARGETS):
target_firm = env.DataToBin(
join("$BUILD_DIR", "${PICO_FS_IMAGE_NAME}"), "$PROJECTDATA_DIR")
AlwaysBuild(target_firm)
else:
target_firm = env.ElfToBin(join("$BUILD_DIR", "${PROGNAME}"), target_elf)
if is_arduino_pico_build:
target_signed_bin = env.BinToSignedBin(join("$BUILD_DIR", "${PROGNAME}"), target_firm)
env.Depends(target_signed_bin, "checkprogsize")
env.Depends(target_firm, "checkprogsize")
target_firm = env.ElfToBin(join("$BUILD_DIR", "${PROGNAME}"), target_elf)
env.Depends(target_firm, "checkprogsize")
env.AddPlatformTarget("buildfs", target_firm, target_firm, "Build Filesystem Image")
AlwaysBuild(env.Alias("nobuild", target_firm))
target_buildprog = env.Alias("buildprog", [target_firm, target_signed_bin], target_firm)
target_buildprog = env.Alias("buildprog", target_firm, target_firm)
env.AddPostAction(
target_elf, env.VerboseAction(generate_uf2, "Generating UF2 image")
)
def _update_max_upload_size(env):
fetch_fs_size(env)
env.BoardConfig().update("upload.maximum_size", env["PICO_FLASH_LENGTH"])
# update max upload size based on set sketch size (or raw maximum size)
if env.get("PIOMAINPROG"):
env.AddPreAction(
"checkprogsize",
env.VerboseAction(
lambda source, target, env: _update_max_upload_size(env),
"Retrieving maximum program size $SOURCE"))
#
# Target: Print binary size
#
@ -291,12 +138,6 @@ target_size = env.Alias(
env.VerboseAction("$SIZEPRINTCMD", "Calculating size $SOURCE"))
AlwaysBuild(target_size)
def RebootPico(target, source, env):
time.sleep(0.5)
env.Execute(
'"%s" reboot' %
join(platform.get_package_dir("tool-rp2040tools") or "", "picotool")
)
#
# Target: Upload by default .bin file
#
@ -306,157 +147,23 @@ upload_protocol = env.subst("$UPLOAD_PROTOCOL") or "picotool"
upload_actions = []
upload_source = target_firm
def UploadUF2ToDisk(target, source, env):
assert "UPLOAD_PORT" in env
progname = env.subst("$PROGNAME")
ext = "uf2"
fpath = join(env.subst("$BUILD_DIR"), "%s.%s" % (progname, ext))
if not isfile(fpath):
print(
"Firmware file %s not found.\n" % fpath
)
return
copyfile(fpath, join(env.subst("$UPLOAD_PORT"), "%s.%s" % (progname, ext)))
print(
"Firmware has been successfully uploaded.\n"
)
def TryResetPico(target, source, env):
upload_options = {}
if "BOARD" in env:
upload_options = env.BoardConfig().get("upload", {})
ports = list_serial_ports()
if len(ports) != 0:
last_port = ports[-1]["port"]
if upload_options.get("use_1200bps_touch", False):
env.TouchSerialPort(last_port, 1200)
time.sleep(2.0)
from platformio.device.list.util import list_logical_devices
from platformio.device.finder import is_pattern_port
from fnmatch import fnmatch
def find_rpi_disk(initial_port):
msdlabels = ("RPI-RP2")
item:str
for item in list_logical_devices():
if item["path"].startswith("/net"):
continue
if (
initial_port
and is_pattern_port(initial_port)
and not fnmatch(item["path"], initial_port)
):
continue
mbed_pages = [join(item["path"], n) for n in ("INDEX.HTM", "INFO_UF2.TXT")]
if any(isfile(p) for p in mbed_pages):
return item["path"]
if item["name"] and any(l in item["name"].lower() for l in msdlabels):
return item["path"]
return None
def AutodetectPicoDisk(target, source, env):
initial_port = env.subst("$UPLOAD_PORT")
if initial_port and not is_pattern_port(initial_port):
print(env.subst("Using manually specified: $UPLOAD_PORT"))
return
if upload_protocol == "mbed":
env.Replace(UPLOAD_PORT=find_rpi_disk(initial_port))
if env.subst("$UPLOAD_PORT"):
print(env.subst("Auto-detected: $UPLOAD_PORT"))
else:
sys.stderr.write(
"Error: Please specify `upload_port` for environment or use "
"global `--upload-port` option.\n"
"For some development platforms it can be a USB flash "
"drive (i.e. /media/<user>/<device name>)\n"
)
env.Exit(1)
if upload_protocol == "mbed":
upload_actions = [
env.VerboseAction(TryResetPico, "Trying to reset Pico into bootloader mode..."),
env.VerboseAction(AutodetectPicoDisk, "Looking for upload disk..."),
env.VerboseAction(UploadUF2ToDisk, "Uploading $SOURCE")
env.VerboseAction(env.AutodetectUploadPort, "Looking for upload disk..."),
env.VerboseAction(env.UploadToDisk, "Uploading $SOURCE")
]
elif upload_protocol.startswith("blackmagic"):
env.Replace(
UPLOADER="$GDB",
UPLOADERFLAGS=[
"-nx",
"--batch",
"-ex", "target extended-remote $UPLOAD_PORT",
"-ex", "monitor %s_scan" %
("jtag" if upload_protocol == "blackmagic-jtag" else "swdp"),
"-ex", "attach 1",
"-ex", "load",
"-ex", "compare-sections",
"-ex", "kill"
],
UPLOADCMD="$UPLOADER $UPLOADERFLAGS $SOURCE"
)
upload_source = target_elf
upload_actions = [
env.VerboseAction(env.AutodetectUploadPort, "Looking for BlackMagic port..."),
env.VerboseAction("$UPLOADCMD", "Uploading $SOURCE")
]
elif upload_protocol == "espota":
if not env.subst("$UPLOAD_PORT"):
sys.stderr.write(
"Error: Please specify IP address or host name of ESP device "
"using `upload_port` for build environment or use "
"global `--upload-port` option.\n"
"See https://docs.platformio.org/page/platforms/"
"espressif8266.html#over-the-air-ota-update\n")
env.Replace(
UPLOADER=join(
platform.get_package_dir("framework-arduinopico") or "",
"tools", "espota.py"),
UPLOADERFLAGS=["--debug", "--progress", "-i", "$UPLOAD_PORT", "-p", "2040"],
UPLOADCMD='"$PYTHONEXE" "$UPLOADER" $UPLOADERFLAGS -f $SOURCE'
)
if "uploadfs" in COMMAND_LINE_TARGETS:
env.Append(UPLOADERFLAGS=["-s"])
else:
# check if we have a .bin.signed file available.
# since the file may not be build yet, we try to predict that we will
# have that file if they private signing key exists.
if isfile(join(env.subst("$PROJECT_SRC_DIR"), "private.key")):
sys.stdout.write("Using signed OTA update file.")
upload_source = target_signed_bin
upload_actions = [env.VerboseAction("$UPLOADCMD", "Uploading $SOURCE")]
elif upload_protocol == "picotool":
env.Replace(
UPLOADER=join(platform.get_package_dir("tool-rp2040tools") or "", "rp2040load"),
UPLOADERFLAGS=["-v", "-D"],
UPLOADCMD='"$UPLOADER" $UPLOADERFLAGS $SOURCES'
UPLOADCMD="$UPLOADER $UPLOADERFLAGS $SOURCES"
)
if "uploadfs" in COMMAND_LINE_TARGETS:
env.Replace(
UPLOADER=join(platform.get_package_dir("tool-rp2040tools") or "", "picotool"),
UPLOADERFLAGS=[
"load",
"--verify"
],
UPLOADCMD='"$UPLOADER" $UPLOADERFLAGS $SOURCES --offset ${hex(FS_START)}',
)
upload_actions = [
env.VerboseAction(BeforeUpload, "Looking for upload port..."),
env.VerboseAction("$UPLOADCMD", "Uploading $SOURCE"),
]
# picotool seems to need just a tiny bit of delay, but rp2040 load not..
if "uploadfs" in COMMAND_LINE_TARGETS:
upload_actions.insert(1, env.VerboseAction(
lambda source, target, env: time.sleep(0.5), "Delaying a tiny bit..."))
# reboot after filesystem upload
upload_actions.append(env.VerboseAction(RebootPico, "Rebooting device..."))
upload_source = target_elf
elif upload_protocol.startswith("jlink"):
@ -466,11 +173,10 @@ elif upload_protocol.startswith("jlink"):
if not isdir(build_dir):
makedirs(build_dir)
script_path = join(build_dir, "upload.jlink")
upload_addr = hex(env["FS_START"]) if "uploadfs" in COMMAND_LINE_TARGETS else board.get(
"upload.offset_address", "0x0")
commands = [
"h",
"loadbin %s, %s" % (source, upload_addr),
"loadbin %s, %s" % (source, board.get(
"upload.offset_address", "0x0")),
"r",
"q"
]
@ -499,34 +205,23 @@ elif upload_protocol in debug_tools:
]
openocd_args.extend(
debug_tools.get(upload_protocol).get("server").get("arguments", []))
# always use a default speed directive of 1000khz or an otherwise configured speed
# otherwise, flash failures were observed
speed = env.GetProjectOption("debug_speed") or "1000"
openocd_args.extend(
["-c", "adapter speed %s" % speed]
)
if "uploadfs" in COMMAND_LINE_TARGETS:
# filesystem upload. use FS_START.
openocd_args.extend([
"-c", "program {$SOURCE} ${hex(FS_START)} verify reset; shutdown;"
])
else:
# normal firmware upload. flash starts at 0x10000000
openocd_args.extend([
"-c", "program {$SOURCE} %s verify reset; shutdown;" %
board.get("upload.offset_address", "")
])
if env.GetProjectOption("debug_speed"):
openocd_args.extend(
["-c", "adapter speed %s" % env.GetProjectOption("debug_speed")]
)
openocd_args.extend([
"-c", "program {$SOURCE} %s verify reset; shutdown;" %
board.get("upload.offset_address", "")
])
openocd_args = [
f.replace("$PACKAGE_DIR", platform.get_package_dir(
"tool-openocd-rp2040-earlephilhower") or "")
"tool-openocd-raspberrypi") or "")
for f in openocd_args
]
env.Replace(
UPLOADER="openocd",
UPLOADERFLAGS=openocd_args,
UPLOADCMD="$UPLOADER $UPLOADERFLAGS")
if not board.get("upload").get("offset_address"):
upload_source = target_elf
upload_actions = [env.VerboseAction("$UPLOADCMD", "Uploading $SOURCE")]
# custom upload tool
@ -537,8 +232,9 @@ if not upload_actions:
sys.stderr.write("Warning! Unknown upload protocol %s\n" % upload_protocol)
AlwaysBuild(env.Alias("upload", upload_source, upload_actions))
env.AddPlatformTarget("uploadfs", target_firm, upload_actions, "Upload Filesystem Image")
#
# Default targets
#
Default([target_buildprog, target_size])

29
examples/arduino-blink/README.md
View File

@ -1,29 +0,0 @@
How to build PlatformIO based project
=====================================
1. [Install PlatformIO Core](https://docs.platformio.org/page/core.html)
2. Download [development platform with examples](https://github.com/platformio/platform-raspberrypi/archive/develop.zip)
3. Extract ZIP archive
4. Run these commands:
```shell
# Change directory to example
$ cd platform-raspberrypi/examples/arduino-blink
# Build project
$ pio run
# Upload firmware
$ pio run --target upload
# Clean build files
$ pio run --target clean
```
## Notes
For Raspberry Pi Pico devices, two Arduino cores exist:
* https://github.com/arduino/ArduinoCore-mbed
* https://github.com/earlephilhower/arduino-pico
This examples showcases how to use both of these cores in the `platformio.ini`.

32
examples/arduino-blink/README.rst Normal file
View File

@ -0,0 +1,32 @@
.. Copyright 2014-present PlatformIO <contact@platformio.org>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
How to build PlatformIO based project
=====================================
1. `Install PlatformIO Core <http://docs.platformio.org/page/core.html>`_
2. Download `development platform with examples <https://github.com/platformio/platform-raspberrypi/archive/develop.zip>`_
3. Extract ZIP archive
4. Run these commands:
.. code-block:: bash
# Change directory to example
> cd platform-raspberrypi/examples/arduino-blink
# Build project
> platformio run
# Upload firmware
> platformio run --target upload
# Clean build files
> platformio run --target clean

31
examples/arduino-blink/platformio.ini
View File

@ -5,7 +5,7 @@
; Library options: dependencies, extra library storages
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
; http://docs.platformio.org/page/projectconf.html
[env]
platform = raspberrypi
@ -16,32 +16,3 @@ board = pico
[env:nanorp2040connect]
board = nanorp2040connect
[env:pico_earle]
board = pico
; "pico" board can use both mbed and earlephilhower core, must select here
board_build.core = earlephilhower
[env:nanorp2040connect_earle]
board = nanorp2040connect
; "nanorp2040connect" board can use both mbed and earlephilhower core, must select here
board_build.core = earlephilhower
; earlephilhower-only boards
[env:rpipico]
board = rpipico
[env:adafruit_feather]
board = adafruit_feather
[env:seeed_xiao_rp2040]
board = seeed_xiao_rp2040
[env:sparkfun_thingplusrp2040]
board = sparkfun_thingplusrp2040
[env:pimoroni_pga2040]
board = pimoroni_pga2040
[env:rpipicow]
board = rpipicow

27
examples/arduino-external-libs/README.md
View File

@ -1,27 +0,0 @@
How to build PlatformIO based project
=====================================
1. [Install PlatformIO Core](https://docs.platformio.org/page/core.html)
2. Download [development platform with examples](https://github.com/platformio/platform-raspberrypi/archive/develop.zip)
3. Extract ZIP archive
4. Run these commands:
```shell
# Change directory to example
$ cd platform-raspberrypi/examples/arduino-external-libs
# Build project
$ pio run
# Upload firmware
$ pio run --target upload
# Build specific environment
$ pio run -e pico
# Upload firmware for the specific environment
$ pio run -e pico --target upload
# Clean build files
$ pio run --target clean
```

38
examples/arduino-external-libs/README.rst Normal file
View File

@ -0,0 +1,38 @@
.. Copyright 2014-present PlatformIO <contact@platformio.org>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
How to build PlatformIO based project
=====================================
1. `Install PlatformIO Core <http://docs.platformio.org/page/core.html>`_
2. Download `development platform with examples <https://github.com/platformio/platform-raspberrypi/archive/develop.zip>`_
3. Extract ZIP archive
4. Run these commands:
.. code-block:: bash
# Change directory to example
> cd platform-raspberrypi/examples/arduino-external-libs
# Build project
> platformio run
# Upload firmware
> platformio run --target upload
# Build specific environment
> platformio run -e pico
# Upload firmware for the specific environment
> platformio run -e pico --target upload
# Clean build files
> platformio run --target clean

2
examples/arduino-external-libs/platformio.ini
View File

@ -5,7 +5,7 @@
; Library options: dependencies, extra library storages
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
; http://docs.platformio.org/page/projectconf.html
[env]
platform = raspberrypi

1
examples/arduino-ota/.gitignore vendored
View File

@ -1 +0,0 @@
.pio

33
examples/arduino-ota/README.md
View File

@ -1,33 +0,0 @@
How to build PlatformIO based project
=====================================
1. [Install PlatformIO Core](https://docs.platformio.org/page/core.html)
2. Download [development platform with examples](https://github.com/platformio/platform-raspberrypi/archive/develop.zip)
3. Extract ZIP archive
4. Run these commands:
```shell
# Change directory to example
$ cd platform-raspberrypi/examples/arduino-ota
# Build project
$ pio run
# Upload firmware
$ pio run --target upload
# Clean build files
$ pio run --target clean
```
## Notes
This examples showcases the usage of Over-The-Air (OTA) updates with the Raspberry Pi Pico W.
For more details, see the [documentation](https://arduino-pico.readthedocs.io/en/latest/ota.html).
For the initial firmware update, use the `rpipicow_via_usb` environment.
Then, open the serial monitor and note down the IP of the Pico that it outputs.
Use this IP as the `upload_port` in the `rpipicow_via_ota` environment and use the "Upload" project task there.

39
examples/arduino-ota/include/README
View File

@ -1,39 +0,0 @@
This directory is intended for project header files.
A header file is a file containing C declarations and macro definitions
to be shared between several project source files. You request the use of a
header file in your project source file (C, C++, etc) located in `src` folder
by including it, with the C preprocessing directive `#include'.
```src/main.c
#include "header.h"
int main (void)
{
...
}
```
Including a header file produces the same results as copying the header file
into each source file that needs it. Such copying would be time-consuming
and error-prone. With a header file, the related declarations appear
in only one place. If they need to be changed, they can be changed in one
place, and programs that include the header file will automatically use the
new version when next recompiled. The header file eliminates the labor of
finding and changing all the copies as well as the risk that a failure to
find one copy will result in inconsistencies within a program.
In C, the usual convention is to give header files names that end with `.h'.
It is most portable to use only letters, digits, dashes, and underscores in
header file names, and at most one dot.
Read more about using header files in official GCC documentation:
* Include Syntax
* Include Operation
* Once-Only Headers
* Computed Includes
https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

46
examples/arduino-ota/lib/README
View File

@ -1,46 +0,0 @@
This directory is intended for project specific (private) libraries.
PlatformIO will compile them to static libraries and link into executable file.
The source code of each library should be placed in a an own separate directory
("lib/your_library_name/[here are source files]").
For example, see a structure of the following two libraries `Foo` and `Bar`:
|--lib
| |
| |--Bar
| | |--docs
| | |--examples
| | |--src
| | |- Bar.c
| | |- Bar.h
| | |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
| |
| |--Foo
| | |- Foo.c
| | |- Foo.h
| |
| |- README --> THIS FILE
|
|- platformio.ini
|--src
|- main.c
and a contents of `src/main.c`:
```
#include <Foo.h>
#include <Bar.h>
int main (void)
{
...
}
```
PlatformIO Library Dependency Finder will find automatically dependent
libraries scanning project source files.
More information about PlatformIO Library Dependency Finder
- https://docs.platformio.org/page/librarymanager/ldf.html

23
examples/arduino-ota/platformio.ini
View File

@ -1,23 +0,0 @@
; PlatformIO Project Configuration File
;
; Build options: build flags, source filter, extra scripting
; Upload options: custom port, speed and extra flags
; Library options: dependencies, extra library storages
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
[env]
platform = raspberrypi
framework = arduino
; upload via USB
[env:rpipicow_via_usb]
board = rpipicow
upload_protocol = mbed
; upload via OTA (change IP)
[env:rpipicow_via_ota]
board = rpipicow
upload_protocol = espota
upload_port = 192.168.0.206

78
examples/arduino-ota/src/main.cpp
View File

@ -1,78 +0,0 @@
#include <ESP8266WiFi.h>
#include <ESP8266mDNS.h>
#include <WiFiUdp.h>
#include <ArduinoOTA.h>
#include "Updater_Signing.h"
#ifndef STASSID
#define STASSID "YourSSID"
#define STAPSK "YourPassword"
#endif
const char* ssid = STASSID;
const char* password = STAPSK;
void setup() {
Serial.begin(115200);
Serial.println("Booting");
WiFi.mode(WIFI_STA);
WiFi.begin(ssid, password);
while (WiFi.waitForConnectResult() != WL_CONNECTED) {
Serial.println("Connection Failed! Rebooting...");
delay(5000);
rp2040.restart();
}
// Port defaults to 8266
// ArduinoOTA.setPort(8266);
// Hostname defaults to esp8266-[ChipID]
// ArduinoOTA.setHostname("myesp8266");
// No authentication by default
// ArduinoOTA.setPassword("admin");
// Password can be set with it's md5 value as well
// MD5(admin) = 21232f297a57a5a743894a0e4a801fc3
// ArduinoOTA.setPasswordHash("21232f297a57a5a743894a0e4a801fc3");
ArduinoOTA.onStart([]() {
String type;
if (ArduinoOTA.getCommand() == U_FLASH) {
type = "sketch";
} else { // U_FS
type = "filesystem";
}
// NOTE: if updating FS this would be the place to unmount FS using FS.end()
Serial.println("Start updating " + type);
});
ArduinoOTA.onEnd([]() {
Serial.println("\nEnd");
});
ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
Serial.printf("Progress: %u%%\r", (progress / (total / 100)));
});
ArduinoOTA.onError([](ota_error_t error) {
Serial.printf("Error[%u]: ", error);
if (error == OTA_AUTH_ERROR) {
Serial.println("Auth Failed");
} else if (error == OTA_BEGIN_ERROR) {
Serial.println("Begin Failed");
} else if (error == OTA_CONNECT_ERROR) {
Serial.println("Connect Failed");
} else if (error == OTA_RECEIVE_ERROR) {
Serial.println("Receive Failed");
} else if (error == OTA_END_ERROR) {
Serial.println("End Failed");
}
});
ArduinoOTA.begin();
Serial.println("Ready");
Serial.print("IP address: ");
Serial.println(WiFi.localIP());
}
void loop() {
ArduinoOTA.handle();
}

11
examples/arduino-ota/test/README
View File

@ -1,11 +0,0 @@
This directory is intended for PIO Unit Testing and project tests.
Unit Testing is a software testing method by which individual units of
source code, sets of one or more MCU program modules together with associated
control data, usage procedures, and operating procedures, are tested to
determine whether they are fit for use. Unit testing finds problems early
in the development cycle.
More information about PIO Unit Testing:
- https://docs.platformio.org/page/plus/unit-testing.html

1
examples/arduino-signed-ota/.gitignore vendored
View File

@ -1 +0,0 @@
.pio

37
examples/arduino-signed-ota/README.md
View File

@ -1,37 +0,0 @@
How to build PlatformIO based project
=====================================
1. [Install PlatformIO Core](https://docs.platformio.org/page/core.html)
2. Download [development platform with examples](https://github.com/platformio/platform-raspberrypi/archive/develop.zip)
3. Extract ZIP archive
4. Run these commands:
```shell
# Change directory to example
$ cd platform-raspberrypi/examples/arduino-signed-ota
# Build project
$ pio run
# Upload firmware
$ pio run --target upload
# Clean build files
$ pio run --target clean
```
## Notes
This examples showcases the usage of **signed** Over-The-Air (OTA) updates with the Raspberry Pi Pico W.
The difference to regular OTA updates is that update binaries are signed using the `private.key` to produce a `firmware.bin.signed` file.
The firmware then uses the `public.key` file to verify the signature on the binary it receives in an OTA update. It will reject OTA update binaries that were not properly signed.
For more details, see the [documentation](https://arduino-pico.readthedocs.io/en/latest/ota.html).
For the initial firmware update, use the `rpipicow_via_usb` environment.
Then, open the serial monitor and note down the IP of the Pico that it outputs.
Use this IP as the `upload_port` in the `rpipicow_via_ota` environment and use the "Upload" project task there.

39
examples/arduino-signed-ota/include/README
View File

@ -1,39 +0,0 @@
This directory is intended for project header files.
A header file is a file containing C declarations and macro definitions
to be shared between several project source files. You request the use of a
header file in your project source file (C, C++, etc) located in `src` folder
by including it, with the C preprocessing directive `#include'.
```src/main.c
#include "header.h"
int main (void)
{
...
}
```
Including a header file produces the same results as copying the header file
into each source file that needs it. Such copying would be time-consuming
and error-prone. With a header file, the related declarations appear
in only one place. If they need to be changed, they can be changed in one
place, and programs that include the header file will automatically use the
new version when next recompiled. The header file eliminates the labor of
finding and changing all the copies as well as the risk that a failure to
find one copy will result in inconsistencies within a program.
In C, the usual convention is to give header files names that end with `.h'.
It is most portable to use only letters, digits, dashes, and underscores in
header file names, and at most one dot.
Read more about using header files in official GCC documentation:
* Include Syntax
* Include Operation
* Once-Only Headers
* Computed Includes
https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

46
examples/arduino-signed-ota/lib/README
View File

@ -1,46 +0,0 @@
This directory is intended for project specific (private) libraries.
PlatformIO will compile them to static libraries and link into executable file.
The source code of each library should be placed in a an own separate directory
("lib/your_library_name/[here are source files]").
For example, see a structure of the following two libraries `Foo` and `Bar`:
|--lib
| |
| |--Bar
| | |--docs
| | |--examples
| | |--src
| | |- Bar.c
| | |- Bar.h
| | |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
| |
| |--Foo
| | |- Foo.c
| | |- Foo.h
| |
| |- README --> THIS FILE
|
|- platformio.ini
|--src
|- main.c
and a contents of `src/main.c`:
```
#include <Foo.h>
#include <Bar.h>
int main (void)
{
...
}
```
PlatformIO Library Dependency Finder will find automatically dependent
libraries scanning project source files.
More information about PlatformIO Library Dependency Finder
- https://docs.platformio.org/page/librarymanager/ldf.html

23
examples/arduino-signed-ota/platformio.ini
View File

@ -1,23 +0,0 @@
; PlatformIO Project Configuration File
;
; Build options: build flags, source filter, extra scripting
; Upload options: custom port, speed and extra flags
; Library options: dependencies, extra library storages
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
[env]
platform = raspberrypi
framework = arduino
; upload via USB
[env:rpipicow_via_usb]
board = rpipicow
upload_protocol = mbed
; upload via OTA (change IP)
[env:rpipicow_via_ota]
board = rpipicow
upload_protocol = espota
upload_port = 192.168.0.206

78
examples/arduino-signed-ota/src/main.cpp
View File

@ -1,78 +0,0 @@
#include <ESP8266WiFi.h>
#include <ESP8266mDNS.h>
#include <WiFiUdp.h>
#include <ArduinoOTA.h>
#include "Updater_Signing.h"
#ifndef STASSID
#define STASSID "YourSSID"
#define STAPSK "YourPassword"
#endif
const char* ssid = STASSID;
const char* password = STAPSK;
void setup() {
Serial.begin(115200);
Serial.println("Booting");
WiFi.mode(WIFI_STA);
WiFi.begin(ssid, password);
while (WiFi.waitForConnectResult() != WL_CONNECTED) {
Serial.println("Connection Failed! Rebooting...");
delay(5000);
rp2040.restart();
}
// Port defaults to 8266
// ArduinoOTA.setPort(8266);
// Hostname defaults to esp8266-[ChipID]
// ArduinoOTA.setHostname("myesp8266");
// No authentication by default
// ArduinoOTA.setPassword("admin");
// Password can be set with it's md5 value as well
// MD5(admin) = 21232f297a57a5a743894a0e4a801fc3
// ArduinoOTA.setPasswordHash("21232f297a57a5a743894a0e4a801fc3");
ArduinoOTA.onStart([]() {
String type;
if (ArduinoOTA.getCommand() == U_FLASH) {
type = "sketch";
} else { // U_FS
type = "filesystem";
}
// NOTE: if updating FS this would be the place to unmount FS using FS.end()
Serial.println("Start updating " + type);
});
ArduinoOTA.onEnd([]() {
Serial.println("\nEnd");
});
ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
Serial.printf("Progress: %u%%\r", (progress / (total / 100)));
});
ArduinoOTA.onError([](ota_error_t error) {
Serial.printf("Error[%u]: ", error);
if (error == OTA_AUTH_ERROR) {
Serial.println("Auth Failed");
} else if (error == OTA_BEGIN_ERROR) {
Serial.println("Begin Failed");
} else if (error == OTA_CONNECT_ERROR) {
Serial.println("Connect Failed");
} else if (error == OTA_RECEIVE_ERROR) {
Serial.println("Receive Failed");
} else if (error == OTA_END_ERROR) {
Serial.println("End Failed");
}
});
ArduinoOTA.begin();
Serial.println("Ready");
Serial.print("IP address: ");
Serial.println(WiFi.localIP());
}
void loop() {
ArduinoOTA.handle();
}

27
examples/arduino-signed-ota/src/private.key
View File

@ -1,27 +0,0 @@
-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----

9
examples/arduino-signed-ota/src/public.key
View File

@ -1,9 +0,0 @@
-----BEGIN PUBLIC KEY-----
MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAu1Pt7yEk/xI+6cozLj5B
u4xV8gXDXcHS0rSJFfl4wBTk4UXpaJRaLfR1k0juEEa5LBRZaoA0iLj2e6kfCibO
Nx0VVoWmeqN2HBc3zkA1eqCksI0QUudzto4KhKHp0odiZ2zo6c/2Tn1zqD/m3OLo
SjVTbsJmGuwx8RGMBXozpg/uL0hHflihX+HND4Xfw92QXv7SaPBhgvM9xyRxn0/w
3J2nNjtuPuVN5vcQkd8ncMexVfy9AWp+HSA5AT5N8CJ/EeIsdDMY1US28bUePzj1
WIo75bZHKZNFw/iXe2xoPpm74qriMNSlW2craFP2K3KYnI28vJeUU6t9I6LS9zt2
zQIDAQAB
-----END PUBLIC KEY-----

11
examples/arduino-signed-ota/test/README
View File

@ -1,11 +0,0 @@
This directory is intended for PIO Unit Testing and project tests.
Unit Testing is a software testing method by which individual units of
source code, sets of one or more MCU program modules together with associated
control data, usage procedures, and operating procedures, are tested to
determine whether they are fit for use. Unit testing finds problems early
in the development cycle.
More information about PIO Unit Testing:
- https://docs.platformio.org/page/plus/unit-testing.html

25
examples/arduino-wifi-scan/README.md
View File

@ -1,25 +0,0 @@
How to build PlatformIO based project
=====================================
1. [Install PlatformIO Core](https://docs.platformio.org/page/core.html)
2. Download [development platform with examples](https://github.com/platformio/platform-raspberrypi/archive/develop.zip)
3. Extract ZIP archive
4. Run these commands:
```shell
# Change directory to example
$ cd platform-raspberrypi/examples/arduino-wifi-scan
# Build project
$ pio run
# Upload firmware
$ pio run --target upload
# Clean build files
$ pio run --target clean
```
## Notes
This example is only intended for the Raspberry Pi Pico W with the [Earle Philhower](https://github.com/earlephilhower/arduino-pico) core.

39
examples/arduino-wifi-scan/include/README
View File

@ -1,39 +0,0 @@
This directory is intended for project header files.
A header file is a file containing C declarations and macro definitions
to be shared between several project source files. You request the use of a
header file in your project source file (C, C++, etc) located in `src` folder
by including it, with the C preprocessing directive `#include'.
```src/main.c
#include "header.h"
int main (void)
{
...
}
```
Including a header file produces the same results as copying the header file
into each source file that needs it. Such copying would be time-consuming
and error-prone. With a header file, the related declarations appear
in only one place. If they need to be changed, they can be changed in one
place, and programs that include the header file will automatically use the
new version when next recompiled. The header file eliminates the labor of
finding and changing all the copies as well as the risk that a failure to
find one copy will result in inconsistencies within a program.
In C, the usual convention is to give header files names that end with `.h'.
It is most portable to use only letters, digits, dashes, and underscores in
header file names, and at most one dot.
Read more about using header files in official GCC documentation:
* Include Syntax
* Include Operation
* Once-Only Headers
* Computed Includes
https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

46
examples/arduino-wifi-scan/lib/README
View File

@ -1,46 +0,0 @@
This directory is intended for project specific (private) libraries.
PlatformIO will compile them to static libraries and link into executable file.
The source code of each library should be placed in a an own separate directory
("lib/your_library_name/[here are source files]").
For example, see a structure of the following two libraries `Foo` and `Bar`:
|--lib
| |
| |--Bar
| | |--docs
| | |--examples
| | |--src
| | |- Bar.c
| | |- Bar.h
| | |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
| |
| |--Foo
| | |- Foo.c
| | |- Foo.h
| |
| |- README --> THIS FILE
|
|- platformio.ini
|--src
|- main.c
and a contents of `src/main.c`:
```
#include <Foo.h>
#include <Bar.h>
int main (void)
{
...
}
```
PlatformIO Library Dependency Finder will find automatically dependent
libraries scanning project source files.
More information about PlatformIO Library Dependency Finder
- https://docs.platformio.org/page/librarymanager/ldf.html

15
examples/arduino-wifi-scan/platformio.ini
View File

@ -1,15 +0,0 @@
; PlatformIO Project Configuration File
;
; Build options: build flags, source filter, extra scripting
; Upload options: custom port, speed and extra flags
; Library options: dependencies, extra library storages
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
[env]
platform = raspberrypi
framework = arduino
[env:rpipicow]
board = rpipicow

43
examples/arduino-wifi-scan/src/main.cpp
View File

@ -1,43 +0,0 @@
// Simple WiFi network scanner application
// Released to the public domain in 2022 by Earle F. Philhower, III
#include <Arduino.h>
#include <WiFi.h>
void setup() {
Serial.begin(115200);
}
const char *macToString(uint8_t mac[6]) {
static char s[20];
sprintf(s, "%02X:%02X:%02X:%02X:%02X:%02X", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
return s;
}
const char *encToString(uint8_t enc) {
switch (enc) {
case ENC_TYPE_NONE: return "NONE";
case ENC_TYPE_TKIP: return "WPA";
case ENC_TYPE_CCMP: return "WPA2";
case ENC_TYPE_AUTO: return "AUTO";
}
return "UNKN";
}
void loop() {
delay(5000);
Serial.printf("Beginning scan at %d\n", millis());
auto cnt = WiFi.scanNetworks();
if (!cnt) {
Serial.printf("No networks found\n");
} else {
Serial.printf("Found %d networks\n\n", cnt);
Serial.printf("%32s %5s %17s %2s %4s\n", "SSID", "ENC", "BSSID ", "CH", "RSSI");
for (auto i = 0; i < cnt; i++) {
uint8_t bssid[6];
WiFi.BSSID(i, bssid);
Serial.printf("%32s %5s %17s %2d %4d\n", WiFi.SSID(i), encToString(WiFi.encryptionType(i)), macToString(bssid), WiFi.channel(i), WiFi.RSSI(i));
}
}
Serial.printf("\n--- Sleeping ---\n\n\n");
delay(5000);
}

11
examples/arduino-wifi-scan/test/README
View File

@ -1,11 +0,0 @@
This directory is intended for PIO Unit Testing and project tests.
Unit Testing is a software testing method by which individual units of
source code, sets of one or more MCU program modules together with associated
control data, usage procedures, and operating procedures, are tested to
determine whether they are fit for use. Unit testing finds problems early
in the development cycle.
More information about PIO Unit Testing:
- https://docs.platformio.org/page/plus/unit-testing.html

6310
misc/svd/rp2040.svd
View File

File diff suppressed because it is too large Load Diff

38
platform.json
View File

@ -1,7 +1,7 @@
{
"name": "raspberrypi",
"title": "Raspberry Pi RP2040",
"description": "RP2040 is a low-cost, high-performance microcontroller device with a large on-chip memory, symmetric dual-core processor complex, and rich peripheral.",
"description": "RP2040 is a low-cost, high-performance microcontroller device with with a large on-chip memory, symmetric dual-core processor complex, and rich peripheral.",
"homepage": "https://www.raspberrypi.org/documentation/rp2040/getting-started/",
"license": "Apache-2.0",
"keywords": [
@ -12,65 +12,47 @@
"RP2040"
],
"engines": {
"platformio": "^6"
"platformio": "^5"
},
"repository": {
"type": "git",
"url": "https://github.com/platformio/platform-raspberrypi.git"
},
"version": "1.9.0",
"version": "1.1.0",
"frameworks": {
"arduino": {
"package": "framework-arduino-mbed",
"script": "builder/frameworks/arduino/arduino.py"
"script": "builder/frameworks/arduino/mbed-core/arduino-core-mbed.py"
}
},
"packages": {
"toolchain-gccarmnoneeabi": {
"type": "toolchain",
"owner": "platformio",
"version": ">=1.90201.0,<1.90302.0"
},
"toolchain-rp2040-earlephilhower": {
"type": "toolchain",
"optional": true,
"owner": "earlephilhower",
"version": "~5.100300.0"
"version": "~1.90201.0"
},
"framework-arduino-mbed": {
"type": "framework",
"optional": true,
"owner": "platformio",
"version": "~4.0.2"
},
"framework-arduinopico": {
"type": "framework",
"optional": true,
"owner": "earlephilhower",
"version": "https://github.com/earlephilhower/arduino-pico.git#456b474a48175328ec251711761dcf957bf09801"
"version": "~2.1.0"
},
"tool-rp2040tools": {
"type": "uploader",
"owner": "platformio",
"version": "~1.0.2"
},
"tool-openocd-rp2040-earlephilhower": {
"tool-openocd-raspberrypi": {
"type": "uploader",
"optional": true,
"owner": "earlephilhower",
"version": "~5.100300.0"
"owner": "platformio",
"version": "~2.1100.0"
},
"tool-jlink": {
"type": "uploader",
"optional": true,
"owner": "platformio",
"version": "^1.72000.0"
},
"tool-mklittlefs-rp2040-earlephilhower": {
"type": "uploader",
"optional": true,
"owner": "earlephilhower",
"version": "~5.100300.0"
"version": "~1.72000.0"
}
}
}

Some files were not shown because too many files have changed in this diff Show More