Merge pull request #9 from maxgerhardt/patchup

Second round of fixups

boards/adafruit_feather.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25x10cl_4_padded_checksum.S",
+        "usb_vid": "0x239a",
+        "usb_pid": "0x80f1"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_ADAFRUIT_FEATHER_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "adafruit_feather",
+    "variant": "adafruit_feather"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25x10cl_4_padded_checksum.S",
-        "usb_vid": "0x239a",
-        "usb_pid": "0x80f1"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/adafruit_itsybitsy.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x239a",
+        "usb_pid": "0x80fd"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_ADAFRUIT_ITSYBITSY_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "adafruit_itsybitsy",
+    "variant": "adafruit_itsybitsy"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x239a",
-        "usb_pid": "0x80fd"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/adafruit_kb2040.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x239a",
+        "usb_pid": "0x8105"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_ADAFRUIT_KB2040_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "adafruit_kb2040",
+    "variant": "adafruit_kb2040"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x239a",
-        "usb_pid": "0x8105"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/adafruit_macropad2040.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x239a",
+        "usb_pid": "0x8107"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_ADAFRUIT_MACROPAD_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "adafruit_macropad2040",
+    "variant": "adafruit_macropad2040"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x239a",
-        "usb_pid": "0x8107"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/adafruit_qtpy.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x239a",
+        "usb_pid": "0x80f7"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_ADAFRUIT_QTPY_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "adafruit_qtpy",
+    "variant": "adafruit_qtpy"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x239a",
-        "usb_pid": "0x80f7"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/adafruit_stemmafriend.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x239a",
+        "usb_pid": "0x80e3"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_ADAFRUIT_STEMMAFRIEND_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "adafruit_stemmafriend",
+    "variant": "adafruit_stemmafriend"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x239a",
-        "usb_pid": "0x80e3"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/adafruit_trinkeyrp2040qt.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x239a",
+        "usb_pid": "0x8109"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_ADAFRUIT_TRINKEYQT_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "adafruit_trinkeyrp2040qt",
+    "variant": "adafruit_trinkeyrp2040qt"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x239a",
-        "usb_pid": "0x8109"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/arduino_nano_connect.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2341",
+        "usb_pid": "0x0058"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_NANO_RP2040_CONNECT -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "arduino_nano_connect",
+    "variant": "arduino_nano_connect"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x2341",
-        "usb_pid": "0x0058"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/challenger_2040_lora.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0x1023"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_CHALLENGER_2040_LORA_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "challenger_2040_lora",
+    "variant": "challenger_2040_lora"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0x1023"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/challenger_2040_lte.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0x100b"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_CHALLENGER_2040_LTE_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "challenger_2040_lte",
+    "variant": "challenger_2040_lte"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0x100b"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/challenger_2040_wifi.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0x1006"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_CHALLENGER_2040_WIFI_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "challenger_2040_wifi",
+    "variant": "challenger_2040_wifi"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0x1006"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/challenger_2040_wifi_ble.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0x102C"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_CHALLENGER_2040_WIFI_BLE_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "challenger_2040_wifi_ble",
+    "variant": "challenger_2040_wifi_ble"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0x102C"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/challenger_nb_2040_wifi.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0x100b"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_CHALLENGER_NB_2040_WIFI_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "challenger_nb_2040_wifi",
+    "variant": "challenger_nb_2040_wifi"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0x100b"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/cytron_maker_nano_rp2040.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0x100f"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_CYTRON_MAKER_NANO_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "cytron_maker_nano_rp2040",
+    "variant": "cytron_maker_nano_rp2040"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0x100f"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/cytron_maker_pi_rp2040.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0x1000"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_CYTRON_MAKER_PI_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "cytron_maker_pi_rp2040",
+    "variant": "cytron_maker_pi_rp2040"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0x1000"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/dfrobot_beetle_rp2040.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x3343",
+        "usb_pid": "0x4253"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_DFROBOT_BEETLE_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "dfrobot_beetle_rp2040",
+    "variant": "dfrobot_beetle_rp2040"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x3343",
-        "usb_pid": "0x4253"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/flyboard2040_core.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_generic_03h_4_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0x008a"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_FLYBOARD2040_CORE -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "flyboard2040_core",
+    "variant": "flyboard2040_core"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_generic_03h_4_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0x008a"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/generic.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_generic_03h_4_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0xf00a"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_GENERIC_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "generic",
+    "variant": "generic"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_generic_03h_4_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0xf00a"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/ilabs_rpico32.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0x1010"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_ILABS_2040_RPICO32_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "ilabs_rpico32",
+    "variant": "ilabs_rpico32"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0x1010"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/melopero_shake_rp2040.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0x1005"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_MELOPERO_SHAKE_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "melopero_shake_rp2040",
+    "variant": "melopero_shake_rp2040"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0x1005"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/nanorp2040connect.json

@@ -1,5 +1,15 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "variant": "arduino_nano_connect",
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_pid": "0x0058",
+        "usb_vid": "0x2341",
+        "usb_manufacturer": "Arduino",
+        "usb_product" : "Arduino Nano RP2040 Connect"
+      }
+    },
     "core": "arduino",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_NANO_RP2040_CONNECT -DARDUINO_ARCH_RP2040",
@@ -15,17 +25,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "NANO_RP2040_CONNECT",
+    "variant": "NANO_RP2040_CONNECT"
-    "arduino": {
-      "earlephilhower": {
-        "variant": "arduino_nano_connect",
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_pid": "0x0058",
-        "usb_vid": "0x2341",
-        "usb_manufacturer": "Arduino",
-        "usb_product" : "Arduino Nano RP2040 Connect"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/pico.json

@@ -1,5 +1,15 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "variant": "rpipico",
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0x000a",
+        "usb_manufacturer": "Raspberry Pi",
+        "usb_product": "Pico"        
+      }
+    },
     "core": "arduino",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_RASPBERRY_PI_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
@@ -11,17 +21,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "RASPBERRY_PI_PICO",
+    "variant": "RASPBERRY_PI_PICO"
-    "arduino": {
-      "earlephilhower": {
-        "variant": "rpipico",
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0x000a",
-        "usb_manufacturer": "Raspberry Pi",
-        "usb_product": "Pico"        
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/rpipico.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0x000a"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_RASPBERRY_PI_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "rpipico",
+    "variant": "rpipico"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0x000a"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/seeed_xiao_rp2040.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0x000a"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_SEEED_XAIO_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "seeed_xiao_rp2040",
+    "variant": "seeed_xiao_rp2040"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0x000a"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/solderparty_rp2040_stamp.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_generic_03h_4_padded_checksum.S",
+        "usb_vid": "0x1209",
+        "usb_pid": "0xa182"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_SOLDERPARTY_RP2040_STAMP -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "solderparty_rp2040_stamp",
+    "variant": "solderparty_rp2040_stamp"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_generic_03h_4_padded_checksum.S",
-        "usb_vid": "0x1209",
-        "usb_pid": "0xa182"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/sparkfun_promicrorp2040.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_generic_03h_4_padded_checksum.S",
+        "usb_vid": "0x1b4f",
+        "usb_pid": "0x0026"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_SPARKFUN_PROMICRO_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "sparkfun_promicrorp2040",
+    "variant": "sparkfun_promicrorp2040"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_generic_03h_4_padded_checksum.S",
-        "usb_vid": "0x1b4f",
-        "usb_pid": "0x0026"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/sparkfun_thingplusrp2040.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x1b4f",
+        "usb_pid": "0x0026"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_SPARKFUN_THINGPLUS_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "sparkfun_thingplusrp2040",
+    "variant": "sparkfun_thingplusrp2040"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x1b4f",
-        "usb_pid": "0x0026"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/upesy_rp2040_devkit.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0x1007"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_UPESY_RP2040_DEVKIT -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "upesy_rp2040_devkit",
+    "variant": "upesy_rp2040_devkit"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0x1007"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/wiznet_5100s_evb_pico.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0x1027"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_WIZNET_5100S_EVB_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "wiznet_5100s_evb_pico",
+    "variant": "wiznet_5100s_evb_pico"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0x1027"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/wiznet_5500_evb_pico.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0x1029"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_WIZNET_5500_EVB_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "wiznet_5500_evb_pico",
+    "variant": "wiznet_5500_evb_pico"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0x1029"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

boards/wiznet_wizfi360_evb_pico.json

@@ -1,5 +1,12 @@
 {
   "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2e8a",
+        "usb_pid": "0x1028"
+      }
+    },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
     "extra_flags": "-D ARDUINO_WIZNET_WIZFI360_EVB_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
@@ -11,14 +18,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "wiznet_wizfi360_evb_pico",
+    "variant": "wiznet_wizfi360_evb_pico"
-    "arduino": {
-      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
-        "usb_vid": "0x2e8a",
-        "usb_pid": "0x1028"
-      }
-    }
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

builder/main.py

@@ -25,97 +25,6 @@ from platformio.public import list_serial_ports
 from SCons.Script import (ARGUMENTS, COMMAND_LINE_TARGETS, AlwaysBuild,
                           Builder, Default, DefaultEnvironment)
 
-
-def BeforeUpload(target, source, env):  # pylint: disable=W0613,W0621
-    upload_options = {}
-    if "BOARD" in env:
-        upload_options = env.BoardConfig().get("upload", {})
-
-    env.AutodetectUploadPort()
-    before_ports = list_serial_ports()
-
-    if upload_options.get("use_1200bps_touch", False):
-        env.TouchSerialPort("$UPLOAD_PORT", 1200)
-
-    if upload_options.get("wait_for_upload_port", False):
-        env.Replace(UPLOAD_PORT=env.WaitForNewSerialPort(before_ports))
-
-
-def generate_uf2(target, source, env):
-    elf_file = target[0].get_path()
-    env.Execute(
-        " ".join(
-            [
-                "elf2uf2",
-                '"%s"' % elf_file,
-                '"%s"' % elf_file.replace(".elf", ".uf2"),
-            ]
-        )
-    )
-
-
-env = DefaultEnvironment()
-platform = env.PioPlatform()
-board = env.BoardConfig()
-
-env.Replace(
-    AR="arm-none-eabi-ar",
-    AS="arm-none-eabi-as",
-    CC="arm-none-eabi-gcc",
-    CXX="arm-none-eabi-g++",
-    GDB="arm-none-eabi-gdb",
-    OBJCOPY="arm-none-eabi-objcopy",
-    RANLIB="arm-none-eabi-ranlib",
-    SIZETOOL="arm-none-eabi-size",
-
-    ARFLAGS=["rc"],
-
-    MKFSTOOL="mklittlefs",
-    PICO_FS_IMAGE_NAME=env.get("PICO_FS_IMAGE_NAME", "littlefs"),
-
-    SIZEPROGREGEXP=r"^(?:\.text|\.data|\.rodata|\.text.align|\.ARM.exidx)\s+(\d+).*",
-    SIZEDATAREGEXP=r"^(?:\.data|\.bss|\.noinit)\s+(\d+).*",
-    SIZECHECKCMD="$SIZETOOL -A -d $SOURCES",
-    SIZEPRINTCMD='$SIZETOOL -B -d $SOURCES',
-
-    PROGSUFFIX=".elf"
-)
-
-# Allow user to override via pre:script
-if env.get("PROGNAME", "program") == "program":
-    env.Replace(PROGNAME="firmware")
-
-env.Append(
-    BUILDERS=dict(
-        ElfToBin=Builder(
-            action=env.VerboseAction(" ".join([
-                "$OBJCOPY",
-                "-O",
-                "binary",
-                "$SOURCES",
-                "$TARGET"
-            ]), "Building $TARGET"),
-            suffix=".bin"
-        ),
-        ElfToHex=Builder(
-            action=env.VerboseAction(" ".join([
-                "$OBJCOPY",
-                "-O",
-                "ihex",
-                "-R",
-                ".eeprom",
-                "$SOURCES",
-                "$TARGET"
-            ]), "Building $TARGET"),
-            suffix=".hex"
-        )
-    )
-)
-
-if not env.get("PIOFRAMEWORK"):
-    env.SConscript("frameworks/_bare.py")
-
-
 def convert_size_expression_to_int(expression):
     conversion_factors = {
         "M": 1024*1024,
@@ -191,6 +100,97 @@ def __fetch_fs_size(target, source, env):
     fetch_fs_size(env)
     return (target, source)
 
+def BeforeUpload(target, source, env):  # pylint: disable=W0613,W0621
+    upload_options = {}
+    if "BOARD" in env:
+        upload_options = env.BoardConfig().get("upload", {})
+
+    env.AutodetectUploadPort()
+    before_ports = list_serial_ports()
+
+    if upload_options.get("use_1200bps_touch", False):
+        env.TouchSerialPort("$UPLOAD_PORT", 1200)
+
+    if upload_options.get("wait_for_upload_port", False):
+        env.Replace(UPLOAD_PORT=env.WaitForNewSerialPort(before_ports))
+
+
+def generate_uf2(target, source, env):
+    elf_file = target[0].get_path()
+    env.Execute(
+        " ".join(
+            [
+                "elf2uf2",
+                '"%s"' % elf_file,
+                '"%s"' % elf_file.replace(".elf", ".uf2"),
+            ]
+        )
+    )
+
+
+env = DefaultEnvironment()
+platform = env.PioPlatform()
+board = env.BoardConfig()
+
+env.Replace(
+    __fetch_fs_size=fetch_fs_size,
+
+    AR="arm-none-eabi-ar",
+    AS="arm-none-eabi-as",
+    CC="arm-none-eabi-gcc",
+    CXX="arm-none-eabi-g++",
+    GDB="arm-none-eabi-gdb",
+    OBJCOPY="arm-none-eabi-objcopy",
+    RANLIB="arm-none-eabi-ranlib",
+    SIZETOOL="arm-none-eabi-size",
+
+    ARFLAGS=["rc"],
+
+    MKFSTOOL="mklittlefs",
+    PICO_FS_IMAGE_NAME=env.get("PICO_FS_IMAGE_NAME", "littlefs"),
+
+    SIZEPROGREGEXP=r"^(?:\.text|\.data|\.rodata|\.text.align|\.ARM.exidx)\s+(\d+).*",
+    SIZEDATAREGEXP=r"^(?:\.data|\.bss|\.noinit)\s+(\d+).*",
+    SIZECHECKCMD="$SIZETOOL -A -d $SOURCES",
+    SIZEPRINTCMD='$SIZETOOL -B -d $SOURCES',
+
+    PROGSUFFIX=".elf"
+)
+
+# Allow user to override via pre:script
+if env.get("PROGNAME", "program") == "program":
+    env.Replace(PROGNAME="firmware")
+
+env.Append(
+    BUILDERS=dict(
+        ElfToBin=Builder(
+            action=env.VerboseAction(" ".join([
+                "$OBJCOPY",
+                "-O",
+                "binary",
+                "$SOURCES",
+                "$TARGET"
+            ]), "Building $TARGET"),
+            suffix=".bin"
+        ),
+        ElfToHex=Builder(
+            action=env.VerboseAction(" ".join([
+                "$OBJCOPY",
+                "-O",
+                "ihex",
+                "-R",
+                ".eeprom",
+                "$SOURCES",
+                "$TARGET"
+            ]), "Building $TARGET"),
+            suffix=".hex"
+        )
+    )
+)
+
+if not env.get("PIOFRAMEWORK"):
+    env.SConscript("frameworks/_bare.py")
+
 env.Append(
     BUILDERS=dict(
         DataToBin=Builder(
@@ -209,9 +209,6 @@ env.Append(
     )
 )
 
-# store function to get infno about filesystems for builder scripts.
-env["__fetch_fs_size"] = fetch_fs_size
-
 #
 # Target: Build executable and linkable firmware
 #
@@ -259,9 +256,6 @@ target_size = env.Alias(
     env.VerboseAction("$SIZEPRINTCMD", "Calculating size $SOURCE"))
 AlwaysBuild(target_size)
 
-def DelayBeforeUpload(target, source, env):  # pylint: disable=W0613,W0621
-    time.sleep(0.5)
-
 def RebootPico(target, source, env): 
     time.sleep(0.5)
     env.Execute(
@@ -322,7 +316,8 @@ elif upload_protocol == "picotool":
 
     # picotool seems to need just a tiny bit of delay, but rp2040 load not..
     if "uploadfs" in COMMAND_LINE_TARGETS:
-        upload_actions.insert(1, env.VerboseAction(DelayBeforeUpload, "Delaying a tiny bit..."))
+        upload_actions.insert(1, env.VerboseAction(
+            lambda source, target, env: time.sleep(0.5), "Delaying a tiny bit..."))
         # reboot after filesystem upload
         upload_actions.append(env.VerboseAction(RebootPico, "Rebooting device..."))
 

examples/arduino-blink/platformio.ini

@@ -38,4 +38,4 @@ board = adafruit_feather
 board = seeed_xiao_rp2040
 
 [env:sparkfun_thingplusrp2040]
-board = sparkfun_thingplusrp2040
+board = sparkfun_thingplusrp2040